Maxon SM9Pro Plus Super Metal Effect

เอฟเฟคกีต้าร์

Made in Japan

The SM-9 Pro+ features Mechanical True Bypass switching via a Fujisoku 4PDT switch.

NOTE ON POWERING THE SM-9 Pro+ – this pedal’s voltage regulator IC requires a high inrush current of approximately 2000 mA upon startup. When using with a Power Brick such as the Voodoo Labs Pedal Power 2+, this pedal should be connected to a high current power jack when possible.

If it is not possible to connect to a high current jack, you can power the SM-9 by leaving a battery in the pedal. Upon initial start-up, unplug the external DC power input cable, engage the pedal, and then plug the DC power input cable back in – the pedal will now power up normally off the external power supply until you power down your pedalboard.

Input Impedance:      500K Ohms
Output Impedance:  10K Ohms or less
Maximum Gain:        52.5dB (4 kHz)
Equivalent Input Noise: -60dB or less (IHF-A)
Control:                    GAIN, SCOOP, LEVEL, EDGE
Switch:                     Bypass/Effect, Voltage Switch (9V/18V)
Indicator:                  Bypass/Effect LED, 9V LED, 18V LED
Internal Circuit Voltage: 9VDC / 18VDC (DC / DC Converter)
Power Consumption: 12mA/9VDC, 42mA/18VDC
Dimensions:              74 (W) x 124 (D) x 54 (H) mm
Weight:                      600g (including battery, excluding AC adaptor
Power Supply:           6F22 / 6LR6 9V battery x 1 or Maxon AC adaptor
Standard Accessory: AC adaptor AC2009,user’s guide

Battery life:
9VDC manganese battery 27 hours @ 25 degrees C (Panasonic 6F22NB)
9VDC alkaline battery 50 hours @ 25 degrees C (Panasonic 6LR61G)
18VDC manganese battery 1.3 hours @ 25 degrees C (Panasonic 6F22NB)
18VDC alkaline battery 6 hours @ 25 degress C (Panasonic 6LR61G)Option: AC adaptor (Maxon AC210N)* OdB = 0.775Vrms